fot
[Top] [All Lists]

[Fot] Gasket

Subject: [Fot] Gasket
From: tr3a58 at verizon.net (Dean Tetterton)
Date: Fri, 13 Jan 2017 08:43:37 -0500
References: <15993b10efe-62b4-809f@webprd-m108.mail.aol.com> <84F56CFCC31FAC48AE160008ADDECFA54802C125@SVR-EXCH02.mccarty-law.com> <FBF4D4B5-3ACF-4155-A1DA-A395CE00FF2F@cs.com>
WOW to think I use the same headlight covers as a Cobra. That has got to make
my TR4 faster?.
Sean??.Watch for those yellow flames in your mirror at the Kastner Cup.

Dean T.


> On Jan 12, 2017, at 8:19 PM, Joe Alexander via Fot <fot at autox.team.net> 
> wrote:
> 
> We supply to several distributors, so I suspect that you will get ours in 
> most cases.
> 
> I think BFE is coming on board, shortly.
> 
> Charly Mitchell, too.
> 
> There was talk of weight reduction, too. Aluminum is about 1/3 the weight and 
> we manufacture several front and rear engine plates.
> 
> Finally, we are now a supplier to Carroll Shelby International. They are 
> using our light weight spun aluminum head lamp replacement on their racing 
> version of the "continuation of build Cobras". These are painted black for 
> showing at Barrett Jackson. Not a big profit center, but fun stuff for these 
> Iowa Boyz.
> 
> <image1.JPG>
> 
> Joe Alexander
> 645 1st Street
> Jesup, IA 50648
> The-vintage-racer.com <http://the-vintage-racer.com/>
> Gasketinnovations.com <http://gasketinnovations.com/>
> Cell:  319.464.4711
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20170113/25c91bb2/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>