In my case, the bolts at the transmission / driveshaft flange had
started to come loose. Only felt it in top gear at high rpm. Really
obvious when I started to dig into it.
Tony Drews
Quoting toodamnfunky@comcast.net:
> FoT,
> I have a driveline vibration that doesn't start up until I get to
> about 95- 100 MPH. I figured I would start with the driveshaft
> before looking into the diff or OD/trans. I have an IRS car with
> Richard Good CV axles and hubs so it's very un likely its that but
> I will inspect them. I'm wondering if anybody has any advice on high
> speed vibration diagnosis or detection.
> What I'm wondering is even if it is the driveshaft how would I know
> with it sitting on my bench.
> Any help would, as always be greatly appreciated.
> Jim g
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|