Steve
The only difference between a machinists and a doctor is, a
machinists washes his hands before he goes to the bathroom.
John Wagner
Just
the wrench
On Monday, November 18, 2013 12:56 PM, Geoff Byrne
<gkbyrne@optushome.com.au> wrote:
I've also looked into this and the problem
is holding the hub to accurately
grind it
Geoff Byrne
-----Original
Message-----
From: fot-bounces@autox.team.net
[mailto:fot-bounces@autox.team.net] On
Behalf Of Jerry Van Vlack
Sent: Sunday,
17 November 2013 1:08 PM
To: Stutzmans; Joe Alexander; Tony Drews
Cc:
fot@autox.team.net
Subject: Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?
I think Bruce meant the hardness of the material was too hard to machine, a
good grinding house could manage it. Or someone with the proper tooling.
JVV
-----Original Message-----
From: Stutzmans
Sent: Saturday, November 16, 2013
8:39 PM
To: Joe Alexander ; Tony Drews
Cc: fot@autox.team.net
Subject: Re:
[Fot] TR-4 / TR-6 tranny layshaft bearing mod?
At my request, my machine shop
guy tried to find somebody who could modify
it to take extra bearings.
Everybody said it was too hard.
Bruce
----- Original Message -----
From: "Joe
Alexander" <n197tr4@cs.com>
To: "Tony Drews" <tony@tonydrews.com>
Cc:
<fot@autox.team.net>
Sent: Saturday, November 16, 2013 9:54 AM
Subject: Re:
[Fot] TR-4 / TR-6 tranny layshaft bearing mod?
> Ed W. (FOG1) can be very
helpful.
>
> Sent from my iPad
>
>> On Nov 16, 2013, at 8:46 AM, Tony Drews
<tony@tonydrews.com> wrote:
>>
>> Has anyone modified the TR-4 / TR-6 tranny
layshaft assembly to accept
> larger, higher capacity bearings? Turns out the
root cause of my
> transmission
> failure was the failure of the front needle
bearing in the layshaft
> assembly.
> Before I do the parts search /
purchases, I thought I'd check to see if
> there's a longevity improvement
that can be made there.
>>
>> It's been a while since the box was apart, and
let me tell you - with a
> buggered up layshaft shaft the disassembly is
challenging.
>>
>> I'll be replacing, input shaft, layshaft and 3rd gear at
least. Also had
>> a
> weird failure where one of the pins that the spring
slides onto in the
> overdrive is broken off - may have been an assembly
issue.
>>
>> I may have most of the parts needed for the rebuild, we'll see
what uncle
> jack's tranny parts stash includes.
>>
>> Cheers, Tony Drews
>>
_______________________________________________
>> fot@autox.team.net
>>
>>
http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>>
Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
> http://autox.team.net/mailman/options/fot/n197tr4@cs.com
> _______________________________________________
> fot@autox.team.net
>
>
http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
>
http://autox.team.net/mailman/options/fot/stutzmans@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive:
http://autox.team.net/mailman/options/fot/jerryvv@roadrunner.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive:
http://autox.team.net/mailman/options/fot/gkbyrne@optushome.com.au
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive:
http://autox.team.net/mailman/options/fot/j.wags63@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|