I do the same as Steve, soak and pack til it can't take any more...works
good.
On Wed, Oct 30, 2013 at 3:42 PM, steve <colordog.1@earthlink.net> wrote:
> Permatex #3. Soak the felt in the sealant overnight so it soaks all the
> way through. The gasket kit doesn't come with enough of the felt. I buy
> an extra felt piece from Moss. Cut into 3/4" strips and drive it in there.
> It's a sticky mess.
> I have an old screwdriver with the bit cut off that is the perfect size
> for the hole. I hammer it in both sides with that tool.
>
> ~Steve
>
>
> -----Original Message-----
> >From: Todd Redmond <alfetta95@optonline.net>
> >Sent: Oct 30, 2013 11:34 AM
> >To: "FOT@autox.team.net FOT@autox.team.net" <FOT@autox.team.net>
> >Subject: [Fot] Rear main felt gasket
> >
> >Fot,
> >
> >
> >What sealant should I use for the rear main felt on the TR3 motor? B I've
> >tried 3 auto parts stores and none have the Gasket Shellac. I've already
> >made my tool for ramming the felt into the rear main. B Just need the
> >sealant.
> >
> >
> >Thanks
> >Todd
> >_______________________________________________
> >fot@autox.team.net
> >
> >http://www.fot-racing.com
> >
> >Donate: http://www.team.net/donate.html
> >Archive: http://www.team.net/archive
> >Forums: http://www.team.net/forums
> >Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/colordog.1@earthlink.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/rfdeanes@gmail.com
>
>
>
--
rob deanes
TR Racer
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|