There is a steel liner in these drums but I doubt there is much material
that can be cut, sometimes there is a min dimension cast into a drum. You
might look for that and if it's there be guided by that dimension.
JVV
-----Original Message-----
From: Bill Tobin
Sent: Thursday, June 20, 2013 7:38 AM
To: Todd Redmond ; FOT@autox.team.net
Subject: Re: [Fot] Aluminum rear brake drums
Hi Todd, the quick answer is I don't think so.
There are a couple differences between the Z drums and Triumph drums. I
think one of Kas' books explained them.
By what I hear, the finned aluminum drums are no longer available.
BTW, I recently bought a set of Z drums on e-bay and am planning on fitting
them to my TR6. I'll keep you posted.
Cheers, Bill
----- Original Message -----
From: "Todd Redmond" <alfetta95@optonline.net>
To: <FOT@autox.team.net>
Sent: Wednesday, June 19, 2013 12:06 PM
Subject: [Fot] Aluminum rear brake drums
> Fot,
>
> Looking at buying a used set of Datsun 240z Aluminum finned rear brake
> drums. Found a pair.
> Might be a silly questions but can these be relined?
>
> Thanks
> Todd
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/jerryvv@roadrunner.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|