One thing I have not seen mentioned is the reason for a "gear" oil. It has
different additives that stop the extremely tight meshing of the gears from
shearing the oil molecules apart. Motor oil does not. I learned this from a
Castrol chemist/rep way back in the late 70s. Gear oil also has anti-foaming
additives. On every street trans I build, overdrive or not, gets gear oil.
________________________________
From: Chuck Arnold and/or Kathleen Kelley
<triosan@gmail.com>
To: Steve Yott <tr4@wi.rr.com>
Cc: Friends
<fot@autox.team.net>
Sent: Monday, May 13, 2013 8:11 PM
Subject: Re: [Fot]
trans fluif
Steve built my racing j type and the shifting is great both in
and out. Has
mtl oil.
On May 13, 2013 4:31 PM, "Steve Yott" <tr4@wi.rr.com>
wrote:
> Staylube GL4 and many of the other 90 weight gear oils work just
fine in
> our
> gearboxes. The one main reason that I always recommend
Redline MT90 is
> that
> in testing of oils this particular product and also
their MTL product
> produced far less foaming. I use a plexi cover on the
gearbox during
> break-in and testing of all the gearbox rebuilds that I
perform. Some of
> the oil products produced scary amounts of foam when
warmed up and running
> at full speed. Keep in mind that 90 gear oil is the
same viscosity as 30
> weight engine oil hence the recommendation over time of
using engine oil.
> At the cost of rebuilding a gearbox as with an engine I
feel that the costs
> of the best quality oils are the best value.
>
> As far
as replacing overdrive cone clutches I replace most but not all
> clutches
during rebuilds. I find on many clutch surfaces that they have
> been burned
and glazed from either poor quality or dirty oil and also from
> not having
enough engagement pressure to work with the amount of torque
> being produced
by the engine. Most of these clutches are over 40 years old
> and are not
that expensive to replace. For race style overdrives I use
> clutches with
thicker linings and machine these in thickness to the
> particular overdrive
to ensure total disengagement but also keep them very
> close so that a
minimum amount of movement is required for engagement.
> This
> results in
the fastest possible engagement, critical to speed!
>
> Steve Yott
>
>
-----Original Message-----
> From: fot-bounces@autox.team.net
[mailto:fot-bounces@autox.team.net] On
> Behalf Of Larry Young
> Sent: Monday,
May 13, 2013 5:46 PM
> To: fot@autox.team.net
> Subject: Re: [Fot] trans fluif
>
> I agree. I don't use anything exotic, just use Staylube GL4. It's
>
available locally and avoids the "yellow metal scare" associated with GL5.
>
>
I believe Quantum usually replaces the brake linings. I don't normally
> find
> that necessary and have not seen a spec for when it should be done. I am
>
aware of a couple of quantum rebuilds that did not want to release from
>
overdrive unless you smacked the housing with a hammer.
> Redline oil seems to
help until they get broken in. Ed Barnard is the guy
> with the experience on
this. Maybe he will weigh in.
> Larry
>
> On 5/13/2013 11:07 AM, Randall
wrote:
> >> See the second article, from June 2005.
> >>
> >>
http://www.quantumechanics.com/qm-htm/topic1.htm
> > Then consider how absurd
it is to claim that Triumph delivered cars
> > with oil that would damage them
instantly. 90 weight GL4 was the
> > factory fill from about 1960 to the end
of the TR6 run.
> >
> > -- Randall
> >
_______________________________________________
> > fot@autox.team.net
> >
> >
http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> >
Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
>
> Unsubscribe/Manage:
> >
http://autox.team.net/mailman/options/fot/cartravel@pobox.com
>
_______________________________________________
> fot@autox.team.net
>
>
http://www.fot-racing.com/
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> http://autox.team.net/mailman/options/fot/tr4@wi.rr.com
> _______________________________________________
> fot@autox.team.net
>
>
http://www.fot-racing.com/
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
>
http://autox.team.net/mailman/options/fot/triosan@gmail.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com/
Archive:
http://autox.team.net/mailman/options/fot/britcars@bellsouth.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|