I have never sprayed this particular type of product, so I don't know if it
sprays out like spray paint or undercoating. If like spray paint, then should
be able to get an even coat. Joe
---------- Original Message ----------
From: "Barr, Scott" <sbarr@McCarty-Law.com>
To: 'Joe Boruch' <jaboruch@netzero.com>
Cc: 'tom strange' <tomstrange5@gmail.com>
Subject: RE: [Fot] Head Gasket Coating
Date: Mon, 25 Mar 2013 13:26:26 +0000
Would you be able to apply this evenly enough to seal?
I wonder whether this might be a nice adjunct to a copper gasket where used to
lower the compression ratio or clear piston pop-up, but where the copper
gasket isn't sealing well.
Scott B.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On Behalf
Of Joe Boruch
Sent: Saturday, March 23, 2013 7:16 PM
To: fot@autox.team.net
Subject: [Fot] Head Gasket Coating
I have been debating the merits of coating a steel shim head gasket with a
Fluoroelastomer (Viton) coating. Cometic gaskets are Viton coated. There are
Fluoroelastomer coatings available in aerosol cans. Have any of you tried
anything like this? Joe(B)
____________________________________________________________
OVERSTOCK ipads: $30.93
Get 32GB Apple iPad for as low as $30.93. Limit 1.Day. Grab yours Now!
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/sbarr@mccarty-law.com
____________________________________________________________
How to Sleep Like a Rock
Obey this one natural trick to fall asleep and stay asleep all night.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|