You might try PRI. I know a lot of people have issues with PRI, but he makes
the best manifold gaskets I've found for my GT6. Heavy composite material, so
good that I have re-used these gaskets several times, disassembling and
re-assembling.
On Jan 14, 2013, at 11:12 PM, robertten1@aol.com wrote:
I'd look for a Payen Head Set for Spit Mk1/Herald 1200. Though I'm Not sure
if you are looking for the carb gaskets or the metal sandwich intake-manifold
Head Gasket. I might have some of the Carb Gaskets in my spares.
Good Luck,
Bob T
'63 Spit Mk1 ( street )
'64 Spit GT ( autocrosser )
-----Original Message-----
From: robert bownes <bownes@seiri.com>
To: Robert MacKenzie <list@mackenzie.aero>
Cc: fot <fot@autox.team.net>
Sent: Sun, Jan 13, 2013 4:30 pm
Subject: Re: [Fot] 1147cc Spit manifold gaskets
I found one at, believe it or not, NAPA. That was about 10 years ago though.
On Sun, Jan 13, 2013 at 4:12 PM, Robert MacKenzie <list@mackenzie.aero>wrote:
> Does anybody have a source for good intake/exhaust manifold gaskets for the
1147cc Spitfire engine? I can get the $3 paper ones but am looking for a
better quality gasket.
I need one urgently.
Robert MacKenzie
NASS # 511
Austin Texas
'78 1500 (street)
'71 GT6 MKIII (project)
'62 Spitfire 4 (race)
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/bownes@web9.com
______________________________________________
ot@autox.team.net
http://www.fot-racing.com
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe: http://autox.team.net/mailman/options/fot/robertten1@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/sjanzen@me.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|