Send a core cam to Ric Cline. He will machine you a race cam. He has
been building a racing GT6's forever. I have an address and phone number
if you are interested.
Bob
On 1/5/13 12:30 AM, Jason Sukey wrote:
> I'm looking at camshafts for my GT6 and am seeing that most of the 6
> cylinder cams are marketed for the TR250 and TR6. Does anyone have any
> experience with how these behave in the higher revving 2L GT6 engines?
> Does the same cam act "bigger" in a GT6? Do they act similar?
>
> For example, say a certain high performance cam has a peak torque at 4700
> rpm and runs out of steam by 6500 rpm in a TR6. If I put the same cam in a
> GT6 engine (assuming all the other variables are the same), would it "come
> on" at a higher rpm due to the smaller displacement/ shorter stroke and
> lower port velocity in the head? Would the shape of the torque curve be
> similar, only shifted to the right a bit for the GT6?
>
> Thanks for any input,
>
> Jason Sukey
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rdavis4@cfl.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|