The NGK BP8HS-10 is a marine plug used in most Yamaha engines.....BR8HS-10
is the Resistor plug....but they work great in TRs also....I run that same
plug in my TR-4 racer and I am happy with it....works great in boat too !
On Mon, Oct 22, 2012 at 11:45 AM, Scott Janzen <sjanzen@me.com> wrote:
> I am prepping the recently acquired TR4 for the Turkey Bowl at Summit
> Point (Thanksgiving weekend) and thought I would get some new plugs. The
> current plugs are NGK BP8HS-10. These come up in google searches as being
> used for marine applications, though there's nothing in the part number
> that indicates that use.
> Engine is about 170 psi compression, 12:1, guessing from the cam that the
> engine will be running between 4,000 and 7,000 RPM. Plugs are running
> light-medium brown, so apparently about the right heat range.
> Recommendations for plugs, or should I stick with what I've got?
>
> Here's the current spec:
> non-resistor plug
> Thread Size: 14mm
> Thread Reach: 12.7mm (1/2")
> Hex Size: 13/16"
> Heat Range: 8
> Gap: 1.02mm (.040")
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rfdeanes@gmail.com
>
>
>
--
rob deanes
TR Racer
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|