Scott, what model SU's - H6 or HS6? Ted
Connected by DROID on Verizon Wireless
-----Original message-----
From: Scott Janzen <sjanzen@me.com>
To: 'Friends of Triumph' Triumph <fot@autox.team.net>
Sent: Tue, Oct 2, 2012 20:59:39 GMT+00:00
Subject: [Fot] SU Carb question
the pistons in the SUs on my recently acquired E production TR4 clatter
wildly at idle and up to 2500 rpm, at least. Springs are installed, and the
damper oil just gets quickly pumped right out the vent hole in the plastic
cap when the car is running.
It certainly smooths out at high speed, but the condition also makes it
difficult to start - I need to stick a finger in each one to hold the damper
up slightly, then get it running over idle speed.
Ideas on where to start?
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/tedtsimx@bright.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net
|