fot
[Top] [All Lists]

Re: [Fot] Zenith-Stromberg needle specs

To: cartravel@pobox.com, FOT@autox.team.net
Subject: Re: [Fot] Zenith-Stromberg needle specs
From: Joe Alexander <n197tr4@cs.com>
Date: Tue, 28 Aug 2012 20:28:52 -0400 (EDT)
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
References: <503D54FF.2080506@pobox.com>
 We use SU NEEDLES on our Strombergs....shim stock is required to locate
needle and to center it.



Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4@cs.com





-----Original Message-----
From: Larry Young <cartravel@pobox.com>
To: FOT <FOT@autox.team.net>
Sent: Tue, Aug 28, 2012 6:37 pm
Subject: [Fot] Zenith-Stromberg needle specs


Is there an electronic copy of the Z-S needle specs available?  I know
they are tabulated in the Haynes manual, but an electronic copy would be
more useful.  I also understand that SU needles can be used in Z-S
carbs.  I'm looking for something similar to the SU needle information
on the web, so I don't have to type a bunch of numbers into the
computer.  I'll use SU needles if necessary, but would like to see (in
an easy to compare form) what is available for the Z-S carbs.
Thanks,
Larry
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>