I measure 0.630", fine thread. Must be 5/8".
Tony
At 06:26 AM 8/21/2012, trmarty@hotmail.com wrote:
>Anybody know off the top of your head what the thread size is in the
>front of a, TR4 crank?
>
>Marty
>
>Sent via DroidX2 on Verizon Wirelessb"
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net
|