[Fot] bleeding hydraulic throw out bearing

[19to1tr6@comcast.net]

Can i get a run down on the bleed procedure for a hydraulic bearing> In the
past i just let gravity do the work but i don't have the clutch peddle as
before, the shifts are sticky

as well as reverse grinds a lot to engage and hard to pull out I ran this on
jack stands up to about 3kB  rpmB B B thanksB  rob
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net