Hi Scott,
Take a look at Kas's latest book. I used these on my GT6 and they work well.
I think Steve Smith also uses them. Dave Bean Engineering sells the set
(inner and outer seals and other hardware for both sides) for use on Formula
Fords and Lotii. Just specify the GT6 size when you talk to them.
In case you don't have their contact info, you can find it here:
http://www.davebean.com/
Chuck
-----Original Message-----
From: Scott Janzen <sjanzen@me.com>
To: 'Friends of Triumph' Triumph <fot@autox.team.net>
Sent: Tue, Nov 8, 2011 10:43 am
Subject: [Fot] Nilos hub seal
Anyone have any experience using these as the inner bearing seal on front
hubs?
'm thinking about using them to replace the felt seals on my GT6 that leak and
all apart every time I disassemble the hubs.
______________________________________________
ot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe: http://autox.team.net/mailman/options/fot/chasgee@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|