Hey Mark,
Sorry no one replied to your posting, but try to understand that looking up
these numbers can be very lengthy trying to find these in all the different
manuals. What I usually do is put the part # and a very short description
into my Google search and see what come up. I did this with your first item
307265 V2989 A 1147 and I came up with a link to Rimmer Bros
http://www.rimmerbros.co.uk/Item--i-GRID005584
Try this and you might be surprised what you'll find.
Good Luck,
Charly Mitchel
----- Original Message -----
From: "Diesel Performance Parts - Info" <info@dieselperformanceparts.com>
To: <fot@autox.team.net>
Sent: Wednesday, July 20, 2011 5:46 AM
Subject: [Fot] Need part ID Help
> Hey membership,
>
> Sent this last week and didn't get but one response, can anyone help me on
> this??
>
> I got a slug of blocks etc that I need help identifying, can you'll help??
>
> Part Numbers that are cast into it somewhere
> on
> the part
>
> Intake Manifold 307265 V2989 A 1147 aluminum intake I
> think??
> Gear reduction starter R-33037
> Koni Shocks 80-1005
> Trans Overdrive Unit 25/633301 015107 6 875 Laycock Tag info
> Cannon Dual Intake 806 or 908 depends which way you hold it. Looks
> to
> be an 1300/1500 dual Webber but I don't know.
> Crankshaft WDB W2156 308737 17746N JOSB
> Supposedly a
> new never run crank that has been hard chromed Mains are 2.3" and rods are
> 1.88"
> Transmission 88306468 V3038 10 spline 1.15"
> Shaft
> at the splines. Has aluminum bell housing with the slave @ 2 o clock and
> starter on passenger side
> Transmission 88306468 V3038 10 spline 0.90"
> Shaft
> has aluminum bell housing with slave at 9 o clock and starter on left side
> Block 311255 (between freeze plugs) FK5785HE,
> mains
> are 2.44" recessed cylinder bores
> Block 305380 (between freeze plugs)
> GA42748HE, by
> dipstick is N111, mains are 2.130"
> Block 307553 (between freeze plugs), Been
> decked so
> no deck surface number, mains are 2.44" and the bore is 2.94"
> Head 6 Port N61 by lifter area, T27, 304955
> Head 8 port with D shaped exhaust outlet,
> 367871,
> 56
> Head 8 port with round exhaust port outlet,
> RKO,
> 27B6, 0589
> Crane Camshaft F-244 210-8, BN3437
> Flywheel Aluminum with replaceable friction area
> steel
> insert, 50-522
> Pistons 17753B
> Carrillo rods Big end 2.0", small end 0.810, center to
> center
> is 6.0"
> Cam bearings 1-363, CSB612, 730883M, 84-25-970
> Push rods New chrome moly 6.0" length???
>
> Thanks so much for any help you can provide.
>
>
> Mark Craig
> Diesel Performance Parts, INC.
> 411 Allied Drive
> Nashville, TN 37211
> 866-455-7788 Phone
> 615-834-9923 Fax
>
> www.dieselperformanceparts.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|