Update, just checked my notes and we are now at 11 flats down on both carbs.
Tim
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Duncan Charlton
Sent: Wednesday, June 15, 2011 3:52 PM
To: fot
Subject: [Fot] Sputtering TR question
With the help of several people, I've got this licked. Fuel pressure was
set
too high (4 psi) for the H6 SUs. I adjusted that to 2.7 psi, installed
leaner
needles and cranked the jets up to 8 flats from where they'd been found at
19
flats. Very good plug color now, no flat spots, and NO sputtering after
letting off the throttle and getting back on it again. Seat of the pants
suggests there has been a power gain in the midrange. Soft-mounting the
carbs
does not appear to be necessary. Now to do some acceleration runs to
optimize
ignition timing.
Thanks to all who contributed -- Michael P, Bob K, Tim M, Jim G, Jim E, Bill
B, Russ M, Irv K, Scott B, Chris, Tony, Kas, and especially Greg Solow, who
walked me through this off-group.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|