When I converted to silicone I used denatured alcohol with no problems.
Sam
In a message dated 5/30/2011 2:33:31 P.M. Central Daylight Time,
toodamnfunky@comcast.net writes:
FoT,
I'm considering building a tool that will flush oil lines, brake lines and
fuel lines while left in the car.
This can be accomplished with a harbor freight parts washer and some
adapter
fittings, hoses and filters.
The part I'm hung up on is the solvent used. My first thought was denatured
alcohol because with compressed air
used after the flushing any residue would easily evaporate. Two things came
up, flash point and erosion of rubber lines.
If anybody has any thoughts on such a tool that won't blow up, eat rubber
lines and won't leave residue please jump in.
as always,
jim g
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/trdoctor@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|