I'm trying to use a normal narrow band O2 sensor to aid in dialing in an
engine. I have a few questions about how these things work:
1. How quickly do they respond to a change, e.g. throttle position or load?
2. How is the AFR reading effected by temperature?
3. How does the AFR read if a cylinder is missing intermittently?
Based on info found on the web, I welded the bung about 4 feet from the
head. Documentation with the Westach gauge says it should be 600
degrees. Mine is running around 450. The way I understand it, the
gauge fundamentally measures oxygen concentration. If a cylinder is
misfiring, there will be oxygen and unburned fuel in the exhaust, not
the same as a rich mixture in a cylinder that is firing. TIA
Larry
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|