Amici, what are your thoughts about camshaft end float and bearing
clearance? Didn't we exchange about it ? Could not find in the FOT database.
We discussed distributor gear recently, but could not find a discussion
about cam end float and bearing clearances.
These certainly have an influence on ignition timing, distributor gear life
and valve train lash.
Are the stock specs ok ? These are :
Clearance bearing #1= 0.00275'' to 0.0047'',
Clearance bearings #2-3-4= .002'' to .0035''
End float min .003'' up to .0075''
Thank you for your thoughts! Much appreciated!
Alex
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|