Good day all,
I'm rebuilding my TR6 front suspension and I've got all the bushings and for
the inner joints and I'm looking for a solution to the trunion pivot seal
parts. The stock system consists of a distance tube, a nylon bushing, a flat
washer, a 'o' ring and a cupped washer on each side of the lower wishbone arm.
The equates to 18 pieces to make up this seal/joint. I don't see a trunion
bushing/seal kit available from the major suppliers, i.e. Moss, VB, TRF, BPNW
etc.
Is there a easier better way? I believe these are the same on all TR's and
Spits and maybe other Triumphs. What are you guys doing for your racecars?
Charly Mitchel
TR6 #44
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|