That is about the right price but I have seen problems with both versions of
the aluminum bell housing and removed mine after finding too many fractures
to suit me. I am back to a cast iron one with shield.
Russ Moore
Spitfire #49
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Joe Curry
Sent: Tuesday, January 11, 2011 6:55 PM
To: 'riverside'; fot@autox.team.net
Subject: Re: [Fot] Herald alloy bellhousing
There are two different castings that were used. The thicker one is good
but the thinner one is probably too weak to be something I would recommend.
I have seen the thicker one going for around a hundred bucks,
Joe
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of riverside
Sent: Tuesday, January 11, 2011 3:28 PM
To: fot@autox.team.net
Subject: [Fot] Herald alloy bellhousing
Is the use of a Herald bellhousing in a Spit a worthwhile
idea? If so, what is a fair price for one?
art de armond
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/spitfire_racing@twcny.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|