Interesting that you should mention bump steer. My TR3A originally had
the stock 0 degree caster A arms. I measured some very bad bump steer
with the original suspension. I then rebuilt the suspension and
installed shortened 3 degree A arms. I measured very little bump steer
with the final setup, so I didn't change the steering arms. I suppose
this data point just confuses the issue.
-Larry
On 10/24/2010 4:57 PM, Enquiries Road & Track wrote:
> the steering arms for zero& 3 degree caster are quite different to
> look at , but i dont have any bump steer data as yet to work out the
> improvements
>
> Terry O'Beirne
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|