er connecting rod!
On Wed, Oct 6, 2010 at 11:07 AM, robert bownes <bownes@seiri.com> wrote:
> Wow. You guys are very scientific. I usually vent my crankcases with a
> connecting ros
>
> On Wed, Oct 6, 2010 at 10:55 AM, <toodamnfunky@comcast.net> wrote:
>
>> I vent from the fuel pump blanking plate and the valve cover with -8
>> lines.
>>
>>
>>
>> jim g
>>
>>
>>
>>
>> ----- Original Message -----
>> From: "Mark Pendergrass" <mpendy@dishmail.net>
>> To: "friends of triumph" <fot@autox.team.net>
>> Sent: Wednesday, October 6, 2010 8:22:15 AM
>> Subject: [Fot] block venting
>>
>> Family, earlier post made mention of venting the block. Seem to have alot
>> of
>> pressure build-up even to the point of haveing to wrap a shop towel around
>> the
>> rocker cover filler cap prior to getting on track. i have a finned
>> aluminum
>> cover with a pretty small vent hose. Would it help to weld a larger bung
>> on
>> cover to accept a bigger vent hose....this is driving me nuts!!! The usual
>> venting stuff we do has been done.........i think! B B Thanks in advance
>> B
>> Mark
>> Pendy B TR4#65
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
>> http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/fot/bownes@web9.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|