Walt and list,
In the mid-ninties I had a street TR4A with wheel spacers on the front.
I had access to a local parts place back room to sort through lug nuts
and studs. I settled on a Ford Taurus wheel stud and nut in a metric
size. They were longer but more important the knurled part that fit the
hub was sized correct. I don't remember what year Taurus exactly but
they were for factory aluminum rims.
Bill Dewar
----- Original Message -----
From: "Walter Hollowell" <walt@hot-tr6.com>
To: <fot@autox.team.net>
Sent: Saturday, October 02, 2010 1:34 PM
Subject: [Fot] wheel studs TR6
> On my TR6 racecar I am using 6mm wheel spacers on the front with 15X6
> Panasport wheels. I am concerned that the stock wheel studs don't reach
far
> enough
> into the wheel nuts. Do any FOT members have any ideas about a source of
> longer studs and optional wheel nuts for this application.
> Thanks
> Walt Hollowell
> Abq., NM
>
> _____
>
> I am using the Free version of SPAMfighter
<http://www.spamfighter.com/len>
> .
> SPAMfighter has removed 112498 of my spam emails to date.
>
> Do you have a slow PC?
<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
> Try free scan!
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/pcdelux@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|