Yes, but be careful doing it. I've had mine apart. There's a hard coating on
the inside that you really don't want to scratch. It's basically just a tube
with a piston that separates air from the oil. I thought mine might be
sticking because I clamped it in the wrong place. It wasn't. Cleaned it all up
with some fresh diesel and stuck it back together.
On Sep 16, 2010, at 9:24 AM, Don Marshall wrote:
> My understanding is that every time we have a major internal event with
bits
> of metal getting loose in the engine we need to not only replace the oil
> cooler but we need to clean out the accusump as well. I've sent mine back
> to the factory for cleaning and rebuild (about $50), but is that something
> that can normally be done here at home?
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|