> I've noticed that the OD does not disengage
> right away at
One common cause is a bit of swarf stuck in the tiny hole near the bottom of
the valve operating shaft. Lots of folks enlarge the hole anyway, for
faster downshifts and less likelihood of getting clogged.
The good news is that you don't have to disassemble the unit, just remove
the transmission tunnel and plug. While you're in there, wouldn't hurt to
replace the valve ball, and tap it into it's seat.
Without meaning to reopen the fluif wars, I really love the Redline MT-90 in
my A-type. Both synchro and OD operation are noticeably crisper than with
motor oil, IMO.
Randall
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|