I have been running the Corvair conversion for a long time. However, I think
Richard Good has the best modern setup. www.goodparts.com
Mike
________________________________
From: Enquiries Road & Track <enquiries@roadandtrack.net.au>
To: fot@autox.team.net
Sent: Mon, August 9, 2010 4:08:03 PM
Subject: [Fot] IRS TR rear hubs & axles
i have finally broken the last of my factory rear hubs at a race meeting, so
now is time for change.I got almost 7 years of racing on the last of the
ones I built with brand new parts, so I'm not complaining
I have looked at some Nissan S13 Sylvia ones and these appeal as they have a
CV jointed axle (which I would have to shorten) and appear relatively easy
to adapt into the IRS trailing arm. Big bonus is the identical stud
pattern. I have seen the older Nissan 260Z and 510 sedan ones fitted, but
they use the very heavy rolling ball axle, which is now technically
out-dated.
what are other racers in the USA currently using??
thanks
Terry O'Beirne
Australia
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|