I checked with my local Napa store and the two kits from OTC would run me
270.00.......Harbor Freight sounds pretty good Mark P
----- Original Message -----
From: "Bobby Whitehead" <igofaster@att.net>
To: "Scott Janzen" <s.janzen@comcast.net>
Cc: "FoT Triumph" <fot@autox.team.net>
Sent: Friday, June 25, 2010 9:01 AM
Subject: Re: [Fot] Universal Joint Tool
> Harbor Freight sells a 12 ton hydraulic shop press (with a stand) that
> sells
> for WELL WORTH THE MONEY... I think it's under a $100.00 Effortless
> removal
> of u-joints and the like....
>
> Bobby Whitehead
> To:
> 'Friends of Triumph' Triumph <fot@autox.team.net>
> Sent: Thu, June 24, 2010
> 3:09:52 AM
> Subject: [Fot] Universal Joint Tool
>
> Any recommendations for a good
> quality universal joint disassembly
> tool? I'm tired of struggling with a
> vice, hammer and other odd bits.
> _______________________________________________
> fot@autox.team.net
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive:
> http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/igofaster@att.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mpendy@dishmail.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|