Anyone using the Chevy rods with the narrow big end please let me know what
oil pressure settings you are using. This past weekend I saw my pressure
bleed off from 75psi at idle 80 psi above 2000rpm to 30psi at idle/60psi
above 2000rpm after 2 laps in my second race. I skipped Sunday's races
because I could not get the cold oil pressure at start up back to 80psi.
I will be pulling the pan this weekend to look at bearings, but I am now
wondering if I need to be setting the pressure regulator higher, like
100psi, due to the amount of oil that get past the narrow rod bearings.
What say the oil pressure gurus.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|