Brad,
If you go metric, it will open a whole wealth of options. Take an old stud
to your local auto parts store and ask to look in their Dorman's catalog.
You will look for the one that fits the shank and is the length you want.
Joe C.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Brad Kahler
Sent: Monday, May 03, 2010 5:20 AM
To: Friends of Triumph
Subject: [Fot] 7/16 TR4 rear wheel studs
Amici,
I'm looking for some longer rear axle (stock axle & hub) wheel studs
for my TR4. I would like some that are about 2" long that are 7/16-20
thread that would replace the stock wheel studs without modification.
Any suggestions?
Thanks,
Brad
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|