I'll have to look at the documentation, but I think it's around 200 or
slightly higher. I've got a manual switch on the dash, wired in parallel to
the temp switch, that I can flip to run the fan on the starting grid if I
want. Once on the track we flip it off if we had used it. We also use it
sometimes to help cool down the engine in the paddock after a session.
Tim
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Mike Mehl
Sent: Saturday, February 06, 2010 1:43 PM
To: Triumph Friends of
Subject: [Fot] TR4 water temp. fan switch question
What temp should I have the switch set to for the fan to turn on?
Thanks!!!!!
Mike Mehl
Suggested annual donation $12.96
You are subscribed as timmurph@fastbytes.com
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|