Dude-
I'm so jealous...a "new" vintage car...wow
the clearance twixt rack and pulley may only be 3/8" and the belt 1"
wide...?BUT it's?less than 3/8 thick...release the tension and pull the belt
off straight forward and it will clear...if it doesn't, you're due for new
motor mounts anyway as they have become oil impregnated (what ...on a British
Car...say it isn't so) and have settled on down and will only cause grief in
the next fortnight...
And NO...that humongous extension does not have to be removed to change a
belt...
I need a good belt myself....
Nick in Nor Cal
So I am doing some maintenance on the 47,000 mile unrestored '61 TR 4
I bought three years ago, and other than rebuilding brakes and
changing fluids, I have basically just driven - who says old Brit cars
aren't reliable?
Anyway, thought I'd change the ancient fan belt. Does the fan
extension shaft, attached by those six or eight crusty little bolts to
the pulley, need to be removed in order to get the belt off? The belt
doesn't squeeze between the fan extension shaft and the top of the
rack. Seems like there is only about 3/8" clearance for a really
thick belt.
Any cheater tricks?
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|