You can kinda see the arrangement on Uncle Jack's TR-6 (now Randy
Williams' TR-6) here:
http://www.tonydrews.com/UncleJackTR6/2009_0509UncleJackTR60043.JPG
A lever is bolted to the right hand side of the release with a fairly
large diameter solid wire (hidden in the photo) running straight
down, through the bottom of the battery box area into the passenger
compartment. When you pull down on the wire, it pulls down on the
lever which pushes the release mechanism toward the rear of the car
releasing the hood.
Tony Drews
At 02:27 PM 6/28/2009, you wrote:
>Did not see if this went out....
>
>
>Any ideas about some other improved way to open the hood on my TR6....
>
>I bought the new crappy one from Moss Motors, of course, the 3 cents
>5/16" bolt they charge 85 cents for wasn't with it... "Hello parts dept..."
>
>If I knew what a POS it was I would have already been working on a
>better idea...
>
>Bobby Whitehead
>
>igofaster@charter.net
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>http://www.fot-racing.com
>
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|
