If you use an aluminum head you have to go with stretch bolts. Does mean the
bolt has 0.8 x 1/2" diameter outside the threaded areas.
Cheers
Chris
-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von Tony Drews
Gesendet: Mittwoch, 27. Mai 2009 07:16
An: Tony and Annie Garmey; fot@autox.team.net
Betreff: Re: [Fot] TR4 main bearing caps
To my knowledge, under racing setup, folks have had trouble getting
head gaskets to seal with them. They don't need as much (or any?)
milling to achieve higher compression ratios, but they have the
reputation of warping and then causing head gasket failure.
- Tony Drews
At 11:31 PM 5/26/2009, Tony and Annie Garmey wrote:
>Anybody "played" with the alloy TR heads?
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|