These guys are great:
http://www.bii1.com/benders/rotary-draw-benders.php
http://www.vansantent.com/tube_bending_machines.htm
you don't need to get a mandrel bender that is more for exhausts. I replaced
the cage in my GT6 with a hand powered tube bender with a good ratchet
mechanism. It was accurate, inexpensive, good exercise and fun. Thus meeting
most of the FOT requirements.
Sorry to get in on this late
Bill B
GT6 (soon)
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On Behalf
Of Mark J Bradakis
Sent: Saturday, March 28, 2009 1:26 PM
To: FOT
Subject: Re: [Fot] Tube bending
We've had this discussion before, I recall. Go to
http://www.team.net/archive and search for
'tubing bender'
I was thinking of buying one last year, I'll see
if I can find the notes I made about it.
mjb.
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|