Re: [Fot] TR4 standard composite HD thickness?

["Tim Murphy" <timmurph@fastbytes.com>]

I measured about 0.050 on the ones I removed after taking the head off.  It
seems I've seen that number before, either from Uncle Jack or in one of
Kas's books.

Tim

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of J.C. Hassall
Sent: Tuesday, March 03, 2009 8:38 PM
To: fot@autox.team.net
Subject: [Fot] TR4 standard composite HD thickness?

Does anyone have the compressed thickness of the -4's standard 
composite head gasket?

TIA

jim

--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go 
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot