I'd recommend a good fuel pressure regulator.
On Nov 2, 2008, at 11:03 AM, Glenn Franco wrote:
> Wow !!
> Thanks for the fast response
>
> I found a slightly bent needle on one of the carbs and noticed that
> both had witness marks from coming in contact with the jet.
> Polished the needles with 600 grit and the pistons now drop without
> interference.
>
> Both carbs flood, 110 octane running out of the air horn when shut
> down.
>
> Measured fuel pump pressure is at 4psi. I'm going to try an lower it
> by backing off the adjusting stud.
>
> Thanks Glenn Franco
> 72 spit race car finding one problem after another.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
Bill Babcock
Babcock & Jenkins
Billb@bnj.com
503.936.7660
www.bnj.com
Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal
Bill@kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|