--===============0690814761==
Content-Type: multipart/alternative; boundary="Apple-Mail-10--22886615";
charset="iso-8859-1"
--Apple-Mail-10--22886615
Content-Type: text/plain;
charset=us-ascii;
format=flowed;
delsp=yes
Content-Transfer-Encoding: 7bit
I run 35 total advance
Sent from my iPhone
On Sep 8, 2008, at 9:19 PM, "Tony Drews" <tony@tonydrews.com> wrote:
> As I recall, I've got about 12 degrees at "idle" (a bit over 1000
> rpm), straight line "curve" to 32 degrees at 3000, then slightly
> increasing advance as the RPM's increase from there. I think it's
> 34 degrees at 6k. Not that far off of your settings.
>
> - Tony D
>
> At 05:54 PM 9/6/2008, Jim Gray wrote:
>> Greetings all,
>> I could use a bit advice on timing. I have one of the new 1-2-3
>> distributors out of the Nederlands.
>> It's an electronic distributor with programmable timing curves.
>> The curve I have at the moment is 10 degrees at 500 - 1000 , 27
>> degrees at 2000 and 33 degrees at 4500
>> there are 16 different curve settings available. Coming off the
>> throttle it falls flat on it's face and I have to coax it up to
>> 3000 where it takes off pretty good. I just installed a set of
>> Mikuni HSR 45's and they ran really well before I installed
>> the distributor. I'm not getting any noticable pinging out of it. I
>> know I still have some jetting to get through
>> but as I mentioned, It didn't have this problem before the
>> distributor went in.
>> Any advice would be appreciated.
>> Jim Gray
>> RMVR # 102
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot@autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
--Apple-Mail-10--22886615
Content-Type: text/html;
charset=utf-8
Content-Transfer-Encoding: 7bit
<html><body bgcolor="#FFFFFF"><div>I run 35 total advance<br><br>Sent from my
iPhone</div><div><br>On Sep 8, 2008, at 9:19 PM, "Tony Drews" <<a
href="mailto:tony@tonydrews.com";>tony@tonydrews.com</a>>
wrote:<br><br></div><div></div><blockquote type="cite"><div>
As I recall, I've got about 12 degrees at "idle" (a bit over
1000 rpm), straight line "curve" to 32 degrees at 3000, then
slightly increasing advance as the RPM's increase from there. I
think it's 34 degrees at 6k. Not that far off of your
settings.<br><br>
- Tony D<br><br>
At 05:54 PM 9/6/2008, Jim Gray wrote:<br>
<blockquote type="cite" class="cite" cite=""><font size="2">Greetings all,<br>
I could use a bit advice on timing. I have one of the new 1-2-3
distributors out of the Nederlands.<br>
It's an electronic distributor with programmable timing curves.<br>
The curve I have at the moment is 10 degrees at 500 - 1000 , 27 degrees
at 2000 and 33 degrees at 4500<br>
there are 16 different curve settings available. Coming off the throttle
it falls flat on it's face and I have to coax it up to<br>
3000 where it takes off pretty good. I just installed a set of Mikuni HSR
45's and they ran really well before I installed <br>
the distributor. I'm not getting any noticable pinging out of it. I know
I still have some jetting to get through<br>
but as I mentioned, It didn't have this problem before the distributor
went in.<br>
Any advice would be appreciated.<br>
Jim Gray<br>
RMVR # 102<br>
</font>_______________________________________________<br>
<a href="http://www.team.net/donate.html"; eudora="autourl">
<a
href="http://www.team.net/donate.html";>http://www.team.net/donate.html</a></a><br><br>
Fot mailing list<br>
<a href="mailto:Fot@autox.team.net";><a
href="mailto:Fot@autox.team.net";>Fot@autox.team.net</a></a><br>
<a href="http://autox.team.net/mailman/listinfo/fot"; eudora="autourl">
<a
href="http://autox.team.net/mailman/listinfo/fot";>http://autox.team.net/mailman/listinfo/fot</a></a></blockquote>
<br>
</div></blockquote><blockquote
type="cite"><div><span>_______________________________________________</span><br><span><a
href="http://www.team.net/donate.html";>http://www.team.net/donate.html</a></span><br><span></span><br><span>Fot
mailing list</span><br><span><a
href="mailto:Fot@autox.team.net";>Fot@autox.team.net</a></span><br><span><a
href="http://autox.team.net/mailman/listinfo/fot";>http://autox.team.net/mailman/listinfo/fot</a></span><br><span></span><br></div></blockquote></body></html>
--Apple-Mail-10--22886615--
--===============0690814761==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
--===============0690814761==--
|