Re: [Fot] Lever shock mounts

[rjl6n@cstone.net]

<snip>

> I found it difficult to get a socket on the hex head because there is so
> little clearance between the socket and the recessed part of the casting
> for the shock body.

I made a tool for this - I took a Snap-On socket
and turned down the outer diameter until it fit
on the recess.

John
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot