My GT6 has a one year old dual point in it with mechanical advance. It runs
great when only the leading set of points are connected. When I connect the
second set, it barely idles and breaks up through the rpm range, to the extent
it revs at all. I changed out the points with a new set, ran emory cloth
through the points, etc, no improvement. I'm setting the leading points at 29
degrees dwell and 35 combined. I have initial advance at about 10 degrees and
total advance at 32. I'm sure I'm missing something obvious here . . . what's
wrong with the second set?
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|