fot
[Top] [All Lists]

Re: [Fot] Trying to mount an electric fan on a high density radiator

To: <jrherrera90@hotmail.com>, "William G Rosenbach"
Subject: Re: [Fot] Trying to mount an electric fan on a high density radiator
From: "rob" <19to1tr6@comcast.net>
Date: Mon, 30 Jun 2008 00:33:14 -0400
while playing on a chassie dyno I recall  >>well i don't recall exactly> but 
I seem to recall about a 2 hp gain on a run with a disconected Alt. It was a 
little bit of a wow factor because we were hrs into the sesion and clawing 
are way up the hp chart.Idid not want to eliminate the Alt. on the 
recomendation the crank trigger would not have enought jucie for a 30 min 
session Joe (B) did you install the crank trigger? If so are you running 
with out the alt?    rob
----- Original Message ----- 
From: "William G Rosenbach" <wgrosenbach@juno.com>
To: <jrherrera90@hotmail.com>
Cc: <fot@autox.team.net>
Sent: Sunday, June 29, 2008 8:18 PM
Subject: Re: [Fot] Trying to mount an electric fan on a high density 
radiator


>>>>I've always wondered how changing to an electric fan causes a gain in
> horsepower.
>
> It doesn't seem that the fan can take much power to run. On my Spitfire
> 1500, when the thermostatic fan clutch was in its last throws of life,
> running along at 4500 RPM the clutch would instantly engage. When it did,
> it slowed the car as quickly as a sharp stab on the brakes.
> Bill
> ____________________________________________________________
> Huge inventory of used cars and trucks. Click now to find the used car you 
> need!
> 
>http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oE0b8PflSa7lT9bBIj8MfEeAqkbzuPkl0ktmla7AlcJbfrM/
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as 19to1tr6@comcast.net
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot


<Prev in Thread] Current Thread [Next in Thread>