Does anyone know if one was ever ID'd for a 1500 4cyl?
Randy, I'd appreciate contact information, if you have it, on the
vendor you refer to below, so I can contact them....
Thanks
-Scott Cypher
spitfireracer@xsmail.com
SCCA #57 HP Spitfire 1500 #362573
Reading, PA
http://gallery.mac.com/srcypher
Shipwright's Disease. Its a nasty affliction, particularly when
owns a british car. Then it can never be cured.
On Apr 1, 2008, at 1:02 PM, Lamp, Randy H wrote:
Scott,
If I remember correctly ,I talked to the folks who made them and we
decided on the one for the small block Ford based on its physical size
and the diameter of the Triumph six cylinder crankshaft where the damper
mounts. I thought it worked very well and will do it again on my current
GT6 ,even if I only drive it on the street and run a few track events.
R. Lamp
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|