I was fine, thanks. The car didn't actually go over on its head. This
was a Summers Bros. axle similar to the style you're using in your kit,
but a much smaller diameter (1.00" I believe). The Summers Bros. axle
we were using was a very nice piece, and would have been fine had I not
made a mistake and slid the car sideways down the track. Cold tires +
too fast, too soon = broken axle.
Scott B.
-----Original Message-----
From: fot-bounces+scott.barr=mccarty-law.com@autox.team.net
[mailto:fot-bounces+scott.barr=mccarty-law.com@autox.team.net] On Behalf
Of Joseph Siam
Sent: Wednesday, March 19, 2008 8:43 AM
To: Jerry Barr
Cc: Fot@autox.team.net
Subject: Re: [Fot] Triumph Comp Axle Kit
Hi Jerry, I he has a a few failures. Hope your son was OK. I have
had two customer break axles my earlier design using stock hubs like you
did. Jim Bush and John Wilkins having seen the cost of repair the new
set is well worth it. Thanks Joe
-----Original Message-----
>From: Jerry Barr <jerrybarr@charter.net>
>Sent: Mar 19, 2008 6:28 AM
>To: Joseph Siam <jsiam1@earthlink.net>
>Subject: Re: [Fot] Triumph Comp Axle Kit
>
>Rafael is talking about my axle. It was one that had the smaller
>diameter shaft to accommodate the bearing in a standard size hub. It
>broke coming out of corner 4 at Blackhawk Farms and almost put my son
>Scott on his head.
>Regards,
>Jerry Barr
>On Mar 19, 2008, at 8:12 AM, Joseph Siam wrote:
>
>> Hi All, I should have the Axle Kits ready next week. I got a
>> great deal on the axles and related parts much better than I expected
>> so I can pass on the discount to you. The price for a complete kit
>> will be $1995.00 This kit is the best one out there.
>> Having talked with Rafael at Summers Brothers Axle he agrees my setup
>> is the way to go. He has had some of his Spitfire axles break due to
>> the small diameter and other flaws . My kit eliminates all of those
>> problems. My axles are larger in diameter and don't have the needle
>> bearing riding on the axle like all the other kits I have seen out
>> there The axles ride in custom Alloy Rear Hubs for the Spitfires and
>> GT6. I have been building Competition Axle set for Spitfire for many
>> years with these hubs. More info at
>>
>>
>> www.chequeredflagracing.net
>>
>> 818 350 6222
>>
>> Thanks Joe
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot@autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> You are subscribed as jerrybarr@charter.net
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
You are subscribed as scott.barr@mccarty-law.com
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|