I have replaced guides in 4 or 5 heads and have just pressed them out. I used
bronze guides for the new ones and have had no problem with the new ones being
loose in the head. They have all needed to be reemed after being pressed into
the head to fit the valve.
The old guides are just the right size to use in my abrasive blast cabinet, so
they get put to good used. Joe(B)
-- "Greg & Alison Blake" <ablake2@austin.rr.com> wrote:
What is the preferred method for removal valve guides from a TR head?
Can I simply press them or drive them out or do I need to preheat the
head in an oven first?
Thanks,
Greg
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_____________________________________________________________
Click here to find a school near you that offers project management
certification courses.
http://thirdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijncIOt087sG1bKDZWMzVwXdo
HWhgtgaOTgDKd0BXXiOlS42W/
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|