fot
[Top] [All Lists]

[Fot] Correct camber on the front end?

To: <FOT@autox.team.net>
Subject: [Fot] Correct camber on the front end?
From: "jim hearn" <jimhearn1@comcast.net>
Date: Tue, 2 Oct 2007 22:57:46 -0700
On my '74 TR6, I have approximately a negative 1 > degree camber with shims
on both front wheels.  After an autocross run, the temperature difference
between the hotter outside and cooler inside of the tire is 7 to 8 degrees F
on the side of the car with higher tire temperatures and around 5 degrees F
between hotter outside and cooler inside of the tire on the other side of
the car.  I have two questions:  First, is this close enough to the correct
camber and if not, what do I do to get more negative camber since I believe
I am at the limit with shims?

[demime 1.01d removed an attachment of type application/ms-tnef which had a 
name of winmail.dat]
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>
  • [Fot] Correct camber on the front end?, jim hearn <=