The preferred method of applying Loctite to rod bolts -- don't.
Get some ARP bolt lubricant and smear 'em with the stuff, including under
the bolt head. (No, you really don't need it on the unthreaded portion).
That's the modern-era trick stuff.
--Rocky Entriken
----- Original Message -----
From: "J.C. Hassall" <jhassall@blacksburg.net>
To: <fot@autox.team.net>
Sent: Saturday, December 23, 2006 7:37 AM
Subject: [Fot] Permatex Red applied to rod bolts
> Amici,
>
> What's the preferred technique for applying Red to bolt threads? Lacking
> info on their Web site, I applied a uniform coating to the leading 1/4
> inch
> of my TR4 rod bolts. A day later it occurred to me that I might have
> weakened the threaded connection by applying too much. But if I'd applied
> just a small spot, it too would have been smeared over the threads and
> might not have been as strong. Yes, I'm overthinking the problem. But
> what say y'all? What's the preferred method?
>
> TIA. Merry Christmas friends!
>
> Jim
> --
> Jim Hassall
> Blacksburg VA
> jhassall@blacksburg.net
> '63 TR4 in autox preparation - 90% finished, 90% to go
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> ------------------------------------------------------------
> Mail was checked for spam by the Freeware Edition of No Spam Today!
> The Freeware Edition is free for personal and non-commercial use.
> You can remove this notice by purchasing a full license! To order
> or to find out more please visit: http://www.nospamtoday.com
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|