Chuck, I have one on my TR6 and screwed around with it quite a bit. I tried
modifying a TR6 lever and installing a knob from a MGB. That didn't work
well at all. I then located a Stag lever and knob. It works great as the
transmission housings are the same except the lever is longer. I think a
Saloon lever will work also but is even longer yet. The Spitfire knob will
work, but the lever will not.
Jeff Quick has a switch mounted on the side of the lever and uses a heater
switch I believe.
The Stag levers are hard to locate, and if you wanted to look at the one I
have, we can do that.
I located the drawing for the PI linkage conversion if you want me to send
that to you.
Charly Mitchel
TR6 #44
----- Original Message -----
From: "Chuck Arnold" <triosan@gmail.com>
To: "Friends" <fot@autox.team.net>; "Triumph" <6pack@autox.team.net>;
<triumph@autox.team.net>
Sent: Thursday, May 11, 2006 8:35 AM
Subject: [FOT] OD Switch on shift lever?
> I am assembling a racing TR5 with OD. Want to put the OD switch on the
> gearshift lever. Does anyone have a recommendation on what is the best
way
> to do this? Did any Triumphs come this way?
> Thanks,
> Chuck
>
> --
> Chuck Arnold
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
|