yes
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of DennisR380@aol.com
Sent: Thursday, September 08, 2005 7:42 AM
To: fot@autox.team.net
Subject: Re: British Frame & engine Uprated Axles
In a message dated 9/8/05 6:36:50 AM, BillB@bnj.com writes:
<< I'm also using this kit and didn't like the thin shims. I haven't had any
problem because I elected not to use them. Instead I used the thickest shim
and dressed the end of the spacer to get the proper clearance. I also
decided to set them up at roughly five thousandths for no particularly good
reason. I like the parts a lot--they solve the problem and make me feel much
more confident in the front wheels staying attached. At least I assume I'm
using the same kit--I suspect Ken got them from the machinist (forgot his
name) that developed them in the FOT. >>
Bill, are you referring to Mark Weathers front axle upgrade kit?
|