On my TR6 I just changed over to slicks this past weekend for a regional
race. I had to trim the upper a-arm corners off and add 9/16" spacers
for clearance.
I had no clearance issues in the back since the rear disc brake brackets
add 5/8" more clearance per side.
Mike
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
Behalf Of rob
Sent: Monday, July 25, 2005 2:47 PM
To: FOT
Subject: Slicks
I would like to set up my Tr-6 with Racing slicks
will i have to add spacers to move away from the A-arm and ball
joint.
My maxium allowable track is 53.8 in the front and 53.3 inches rear
A--2002 Hoosier tire cat. list two sizes a 8.5" with and a 9.5"
respective section withs are 9.4 and 10.4
With the quick intial messure ment its seems my track can be
increased
about 2 and 3/4 " I am currently running the the Street TD 245/45/15
with
an 8.5 tread with and a 10.0" section with
thanks for any feed back rob
|